SPECTRAPURE 90-GPD MEMBRANE 99% RO REJECTION *TESTED* (MEM-SP-0090)

Description

SPECTRAPURE RODI 90 GPD MEMBRANE 99% RO REJECTION RATED TESTED (MEM-SP-0090). Condition is New. Shipped with USPS Priority Mail. Recently Manufactured and Hand Tested.
Special price while supplies last.
SpectraPure® SpectraSelect Plus™ 99% Rejection Membranes set the industry standards for contaminate removal, high flow rate, and membrane longevity. Using a proprietary process, SpectraSelect Plus™ membranes are pre-treated to enhance rejection and increase product water production, while effectively doubling post deionizing cartridge life.
SpectraSelect membranes are hand-picked and individually tested for consistent ultra-high rejection ratios.
No other membrane can match SpectraSelect Plus™ for membrane life, or the ability to remove silica, phosphates, nitrates, and heavy metals.
SpectraSelect Plus™ Membranes are standard equipment in SpectraPure MaxCap™-AF & -MF RO/DI Systems, SpectraPure UHE RO/DI Systems, and are now included in SpectraPure’s newly upgraded CSPDI -AF & -MF RO/DI Systems.
They are can be used as an upgrade replacement option for most residential / aquarium Reverse Osmosis or RO/DI Systems and are interchangeable with Captive Purity™, Kent Marine® and other standard-sized TFC membranes.
Specifications:
Typical stabilized conductivity rejection 99%, minimum conductivity rejection 98%.
Membranes produce rated GPD ± 20% at 60 psi & 77°F (25°C) w/ 250ppm softened water feed & 15% recovery.
Maximum temperature 113F (45c)
pH range 2-11
Free chlorine limits less than 0.1ppm
Maximum feed water silt density index (SDI) 5
Note: RO Membranes must be matched with appropriate flow restrictors. Always change or adjust the flow restrictor when modifying membrane GPD rating on any RO or RO/DI system.
SpectraPure® SpectraSelect Plus membranes are prepared with a proprietary process to enhance rejection and increase production. These prepared membranes are then hand picked and individually tested for consistent ultra high rejection.
FEATURES:
Typical stabilized conductivity rejection 99%, minimum conductivity rejection 98%*
Membranes produce rated GPD ± 20% at 60 psi
* Permeate flow and conductivity rejection based on 250 ppm, 77°F (25°C) softened water feed, 15% recovery and the specified applied pressure
Working limits:
Maximum temperature 113F (45c) note: DO NOT FREEZE-DAMAGE MAY OCCUR!
pH range 2-11
Free chlorine limits less than 0.1ppm
Maximum feed water silt density index (SDI) 5
Note: Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size on your system.