-40%

MaxCap 6 Stage Manual Flush RO/DI System - 300 GPD (MC-RODI-30010-MF) - SpectraP

$ 251.85

Availability: 21 in stock
  • Brand: Spectrapure
  • Condition: New
  • MPN: SP450106, MC-RODI-30010-MF

    Description

    The SpectraPure 300 GPD MaxCap RODI System w/ Manual Flush Valve incorporates dual 150gpd high-silicate removal TFC membrane, 0.5 micron MicroTec Sediment and 0.5 micron Carbon Block Filters, plus the new 33% greater capacity MAXCAP and SilicaBuster SuperDI DI Cartridges. Manual flush valve, ASO Valve and Float Valve are included, and two Dual-Probe Inline TDS Monitors measure water purity at 4 different points in the system. You can be always be assured of Zero-TDS product water. These systems maximize pure water production through application of the laboratory grade resins used in our specialty deionization cartridges, providing 99.95% Silica Removal and Extended DI Cartridge Life. Ultra-high purity DI water at a half the cost!
    Features:
    300 gallon per day 98% rejection* thin-film composite Reverse Osmosis Membrane
    2:1 waste ratio produces 50% less waste water
    - 33% larger High-Capacity SuperDIMaxCap DI Cartridge has 4 times more capacity than a typical mixed-bed DI cartridge
    %%GLOBAL_ShopPathSSL%%/high-capacity-color-indicating-mixed-bed-di-filter-cartridge-10-spectrapure/
    - 33% larger High-Capacity SuperDISilica-Buster DI Cartridge maximizes silica and phosphate removal
    %%GLOBAL_ShopPathSSL%%/silica-buster-di-filter-cartridge-10-spectrapure/
    - Ultra-high efficiency 0.5 micron MicroTec Sediment Pre-Filter
    %%GLOBAL_ShopPathSSL%%/rodi-sediment-filter-5-micron-standard-2-5-10-generic/
    - 0.5 micron Carbon Block Pre-Filter with 20,000 ppm-gallons chlorine removal capacity
    %%GLOBAL_ShopPathSSL%%/rodi-carbon-filter-0-5-micron-standard-2-5-10-generic/
    Accessories Included:
    Two Dual-Probe Inline TDS meters: One monitors RO Membrane performance and one monitors DI cartridge performance
    Tri-color custom pressure gauge indicates when to change prefilters
    Manual flush valve for longer membrane life
    Automatic in-line shutoff valve saves water
    In-line ball valve for manual system shut off
    Float valve for unattended operation
    Clear filter housings
    Durable, no-rust mounting bracket
    6-foot feed tubing
    8-foot product and waste lines included
    Housing wrench for easy filter removal
    Garden hose adapter for tap water hookup
    Dimensions: 20in x 7in x 16in
    1 year manufacturer's warranty
    Membrane Information
    90 GPD Systems =
    MEM-SP-0090
    150/300 GPD Systems =
    MEM-SP-0150
    Typical stabilized conductivity rejection 99%, min. conductivity rejection 98%.
    Membranes produce rated GPD ± 20% at 60 psi.
    Permeate flow and conductivity rejection based on 500 ppm, 77°F (25°C) softened water feed, 15% recovery and the specified applied pressure.
    Warning:
    Spectrapure does not recommend drinking water produced from deionization (DI) as DI resins are typically not made of food grade approved material.
    *RO and RODI systems that are installed areas with low feed-water pressure often require a booster pump to optimize system operation.
    The correct Booster Pump to be used with SpectraPure’s Manual Membrane Flush (-MF) RO or RODI Systems is SpectraPure’s auxiliary High-Flow Booster Pump Kit P/N: BPHF-MF-115. This kit is designed specifically for use with SpectraPure Manual-Flush Systems. Other booster pump kits are not compatible with SpectraPure Manual-Flush (-MF) systems.
    Listing and template services provided by inkFrog