Cabinet Air Control Cooling fans with and adjustable thermostat & multi-speed

Description

CABINET AIR CONTROL (4-fan) Thermostat-Controlled Cooling System for Equipment Cabinets
This cooling system has 4 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
Also included is an adjustable thermostat and a multi-speed fan controller.
The fans are built into 2 housings (usually one intake and one exhaust module).
This system is intended to help cool:
Home Theater cabinets / AV cabinets / Computer Desks /
Receivers / Amplifiers / Stereos / Audio Visual Systems / Aquarium equipment bases / Kitchen base cabinets / Wine cooler cabinets.
What's
Included?
THE COOLING SYSTEM INCLUDES:
2 x dual-80mm fan cabinet units, 1 x adjustable thermostat, 1 x multi-speed power transformer, 2-way power distribution cable, mounting hardware, and printed installation instructions.
Note:  In the listing pictures, the cooling systems are shown in two views: 1) against a woodgrain panel, to show how it might look when mounted in a cabinet and 2) against a colored panel, displaying the complete system.
These panels are used for display purposes only, and are not included with the system.
2 x dual-80mm
cabinet fan units
(4 fans), with
mounting plates
and grills.
The mounting
screws are shown
already installed.
1 x adjustable
thermostat,
with a 5 foot
power control
cable. The therm
attaches to your
cabinet using
2-part adhesive
Velcro pads.
1 x 2-way power
distribution cable.
Fan units can be
separated up to
7 feet apart.
1 x multi-speed
power transformer,
with a 4-1/2 foot
cable.  You can
choose from 6
different speeds
for the fans.
Features
The cooling system has 4 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
The mounting plate & grills seal air and make installation easy.   This setup allows you to easily change the fans' airflow direction, if necessary.  The fan unit is securely fastened to your cabinet by screws.
The system includes an adjustable thermostat, which is mounted on the inside of your cabinet.  It allows you to set the temperature for the fan to come on and turn off.  This rugged thermostat does not require batteries, and will function untended for years.  The thermostat has adhesive velcro pads on the back, to make mounting in your cabinet easy.
The fan units are connected by a 2-way power distribution cable, which allows you to separate the fans by up to 7 feet apart.
Also includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this adjustable transformer, which can be set to any one of 6 different speeds.
INTERNATIONAL BUYERS:
The unit's power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.
Contact me if you need an adapter plug (
there is no charge
), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
Even at medium speeds settings, the fans will replace a volume of air equal to that of most cabinet areas several times per minute (see airflow specs below).
All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
The standard system comes with one intake and one exhaust unit, with air coming out the front of one fan unit and out the back of the other.  If you would like to have another configuration, just tell me which way you want the air to come out of each fan unit -- out the front or out the back, and I will set the system up that way.
There is no extra charge for this option.  You can also easily change the fan orientation later, if necessary.
The system comes with instructions and a mounting template to facilitate installation.
It comes completely assembled, with all components installed, wired and ready to go!
Specifications
Fan unit dimensions:
The 80mm dual-fan cabinet cooling unit measures approximately 4-5/8" high x 8" wide, which includes the mounting plate.  The required hole is approximately 3-1/4" high x 6-5/8" wide.  The unit is 1-1/4" thick behind the mounting plate, and only requires about 1/3" additional space for airflow.
Thermostat specifications:
The thermostat is 3" square, and 1-1/4" thick (from front to back) .
It can be set from below 50F to 95F, or 10C to approx. 35C.
Maximum current draw:
.64 amps or 8 watts.  Normal operation (at lower speeds) will draw less current and watts.
Bearing type:
Super quiet, long lasting Fluid Dynamic bearings.
The table below shows specifications for
the combined 4 fans
,
when run together,
at several different speeds.
The shaded area on the table indicates suggested fan speeds for this system.
With cabinet cooling, slow (and quiet) are the way to go!
Fan Speed
Full
3/4
2/3
1/2
1/3
1/4
CFM (cubic feet of air per minute)
124
92
80
64
40
32
DB (decibels/ noise level)
25
22
19
16
13
10
Fan RPM (speed)
2000
1500
1320
1000
660
500
If you would like to see this cooling system's installation instructions, please contact me and I will supply a .PDF file with the contents.
Payment, Shipping
& Warranty
Payment:
You can pay using Paypal, or by using a major credit card, after your purchase.
Shipping:
Within the U.S., shipping is normally by Priority Mail.  For International shipments, I use USPS First Class International.
Import duties, etc.:
International Buyers – Please Note:
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Returns:
Within the first 30 days after receipt, systems which are in original condition can be returned for a full refund of the purchase price.  Please contact me for shipping address and instructions
.
Warranty:
All systems are covered by a 12 months parts & labor warranty.
YOUR SATISFACTION IS GUARANTEED!
Custom Systems
Please contact me if you have any questions, or if you want to discuss a custom cooling system to fit your special needs:
Click here to ask a question
You can also visit my Ebay store, where you will find systems designed for a number of different cooling needs:
Click here for my store
All text and images on this page (other than those provided by Ebay), copyright © 2007-2017 by DR McKenzie. Rev. 051717