-40%
C S Osborne 169- 6, Rivet Setter and 25 - ¾ Rivets Included
C S Osborne 169- 6, Rivet Setter and 25 - ¾ Rivets Included
C S Osborne 169- 6, Rivet Setter and 25 - ¾ Rivets Included

C S Osborne 169- 6, Rivet Setter and 25 - ¾ Rivets Included

$ 19.5

Availability: 31 in stock
  • Item must be returned within: 30 Days
  • Size: Number 6
  • Model: 169-6
  • All returns accepted: Returns Accepted
  • Brand: C S Osborne
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: 169-6
  • Condition: New
  • Type: Rivet Set
  • Country/Region of Manufacture: United States
  • Return shipping will be paid by: Seller

    Description

    C S Osborne No 169- 6,
    Rivet Setter and 25 - ¾ Rivets Included
    This rivet set is made from drop forged steel, with an polished and hardened working face.
    Sets copper and iron rivets.
    As with all tools from C S Osborne, it was made to last a lifetime. Made in the USA. Use with number 12 copper rivets. 25 Number 1700-12 X ¾ long copper rivets included.
    Product Features:
    ·
    Made from Solid Forged Steel.
    ·
    Polished face.
    ·
    Hardened working end.
    ·
    Made in America.
    ·
    When properly cared for, these tools will last for decades.
    Osborne No.
    Hole Dia.
    Copper Rivet
    Rivet Shank Dia.
    Weight ea (oz.)
    UPC No.
    169-6
    .141
    12
    .137
    5
    096685672823
    Instructions:
    Choose the setter with a hole diameter slightly larger than the rivet being set. Push the rivet through the hole then turn the material over. Place burr on rivet, then use the rivet setting tool?s straight hole to drive the burr down tight against the material. Cut the rivet off close to the burr with side cutters or end nippers. Do not cut off flush with the burr, but leave about 1/16 of an inch above the burr. Place the concave recess of setter on the burr. Hold perpendicular and strike the tool forcefully, turning to the left then right as you strike. This spreads the end of the rivet over the burr, simultaneously rounding its end. A few extra blows rivet hammer can be used to flatten the rivet end a bit, if desired.