Bose Acoustimass 3 series IV Speaker System #1, + ACCESSORIES+ *FREE SHIPPING*

Description

Bose Acoustimass 3 series IV Speaker System #1,  +++ ACCESSORIES +++    ****FREE SHIPPING****
These Bose Systems come with all you need to be able to install the system into your space.  We just finished testing the
Bose Acoustimass 3 series IV Speaker System
and they sound great.  These are used systems having little scuffs you would expect on well taken care of gear. Please notice the scratches on the bass unit, they are there when you look.  Included are wall mounts, table stands, black and white speakers so you have flexibility in your space.
Included with this Item:
1 - Bose Acoustimass module 3 series IV Speaker System
2 - Bose Black cube speakers
2 - Bose White cube speakers
2 - Bose Table Stands for Bose cube speaker
2 - Wall mounts for Bose cube speakers
4 - 15' Speaker cables
The Bose® Acoustimass® 3 speaker system. Its quality construction and advanced technologies result from years of ongoing research at Bose.  Bose patented Acoustimass speaker technology delivers full, natural audio performance and,
for all of the sound it produces, this Virtually Invisible® system takes up very little space. The tiny cube speakers fit almost anywhere, while the Acoustimass module is designed to be hidden behind drapes, under furniture, or in the corner of the room.
Selecting locations for the cube speakers
You can place the cube speakers anywhere from 3 to 15 feet (0.9 - 4.6 m) apart. For the most natural sound in average sized rooms, place them 6 to 12 feet (1.8 - 3.7 m) apart. Magnetic shielding allows you to place them close to a video screen without causing interference.  Bose mounting accessories, including wall/ceiling mounting brackets, floor stands, and table stands, add to your choice of where to place the cube speakers.
Selecting a location for the Acoustimass® module
The Acoustimass module can be hidden almost anywhere in a room. Leave at least 2 inches (5 cm) of space between the opening (port) and the wall. To prevent interference, keep the module at least 2 feet (0.6 m) from any video screen. For a balanced sound in most rooms, place the module along a wall within 5 feet (1.5 m) of the corner. To increase bass response, move the module closer to a corner without blocking the
opening. To decrease the bass, place the module farther from the corner
Connecting the cube speakers to the Acoustimass® module
Use the following steps to connect the cube speakers to the rear panel of the Acoustimass module:
1. Select one pair of wires, and locate the terminal tab on the rear of the left cube speaker.
2. Press the terminal tab on the back of the speaker and insert the marked wire into the red (+) terminal and the plain wire into the black (–) terminal (Figure 3).
3. Release the terminal tab to secure both wires.
4. Repeat this process with the other pair of wires and the right cube speaker.
CAUTION: Do not connect your amplifier or receiver directly to the cube speakers. Cube speakers must be connected directly to the Acoustimass module or damage will result.
5. Locate the terminals marked OUTPUTS TO CUBE SPEAKERS on the rear panel of the Acoustimass module (Figure 4).
6. Connect the free end of the left cube speaker cable to the left (L) pair of terminals. Make sure that the marked wire is connected to the positive (+) terminal and the plain wire is connected to the negative (–) terminal.
7. Repeat step 6 for the right cube speaker cable, connecting its wires to the right (R) pair of terminals