4 Set Ceiling Fan Blade Balancing Kit Fan Weight Balancing Kit Include Balanci

Description

4 Set Ceiling Fan Blade Balancing Kit Fan Weight Balancing Kit Include Balanci
Warm tips: this fan balancing kit is compatible with most ceiling fans.
Specific function: the plastic balancing clip makes it easier to locate problem area and self-adhe 5G weights to help correct the wobble, the permanent weights are secured with a very sticky adhesive which come free
Working principle: according to the physics interpretation, when the fan rotates, the thinner the area of bea wind is, the less resistance will exist for the patch, and it will be more favorable for the patch to stick to the fan blade
Advantages: this fan blade balance kit solves the swing problem caused by the irregular blade or blade holder, it only helps prevent the ceiling fan from wea, but also helps reduce noise, maintain good support of fan blades and other components to extend service life
Using Steps
1. Turn the fan on and set the speed control setting to a speed at which the wobble is the greatest.
2. Turn off the fan and allow it to come to a complete stop select one blade and place the balance clip on it. Halfway between the blade holder and blade tip on the trailing edge of the blade.
3. Turn the fan on e whether the wobble has increased or decreased. Turn the fan off ,move the clip to aher blade, and retest. Repeat this procedure on all blades ing the blade on which the greatest improvement is achieved.
4. Move the clip back to the blade that showed the greatest improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives the improvement.
5. Remove the clip and install a balancing weight to the top of blade along the centerline near the point where the clip was positioned.
6. If the fan wobble problem has been corrected you may wish to try to improve the balancing further by using the balancing clip and additional weights.