2 Small 1/4" X 1/2" X 3" Steel ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 TON

Description

OUR MOST POPULAR SMALL BAR.
If you don't have a pair of small bars for your arbor press you are probably wondering what's missing.  These essential bars are lightly polished on all 6 sides to remove high spots and insure maximum surface contact to workpiece.  This is most important on small presses.
Th
ese bars were designed for use on our .5 Ton Import arbor press where they easily support 1000 lbs. over the anvil wheel slot span of less than 1-1/4".
They are also useful as bench blocks, shims,
and set-up blocks.
Perhaps you could use a pair or more in  your shop.
Rated maximum yield strength of greater than 52000psi.
Common steel has yield strength of 20,000 psi.  These are deburred, degreased, lightly ground, polished and ready to use.
You will receive 2 brand new bars.  Your bars are made from Prime Steel and may have visual surface marks that in no way impact the use to which they are intended.  Let us know how you like them or give us ideas for improvement.
Shown here on our 4.5", 1/2 ton anvil wheel ( anvil wheel not included)
Shipped FREE right to your door.
Always hassle free shopping.